A completely Automated Design Concept in Equipment to Mix and Pump in Place Gypsum & Other Cementitious Products.  Automatically Mixes and Pumps Gypsum Based Slurries with Sand Aggregate Requiring Only One Operator on Ground Level.

•  Powered by a Cummins Diesel Engine and a Hydrostatic Transmission.
•  Mixer is a Patented 10 cu. ft. Rubber Lined Double-Drum Mixer that is Hydraulically Operated via a Mechanical Drive.  Two Counter Rotating Ribbon Paddles Blend and Move Material Through  the Hydraulically Operated Door.
• Material Pump is a #100 Progressive Cavity Pump Consisting of a Chrome Rotor and Natural Rubber Stator.  The Pump is Attached to a 12 cu. ft. Wet Material Hopper and can Produce Variable Outputs from 0-120gpm @ 0 psi.
• Material & Sand Storage Hopper will hold 70 cu.ft.  and 100 cu.ft. respectfully.  They Both Come Complete with Lids and the Material Hopper includes a Bulk Bag Breaker. The Hoppers are Mounted on Load Cells for Loss of Weight Operation.  Material is Automatically Transferred from the hopper to the Mixer by a Hydraulicly  Powered Auger While the Sand is Transferred by a Conveyor.
• Water System consist of a 200 Gallon Water Tank with Sight Glass, Float Valve on Water Inlet, Hydraulically Powered Water Pump and Automatic Water System.
• Mobile Batch Control System Automatically Controls All Mixing and Pumping Components.  There are Twenty User Defined Mix/Batch Recipes for Ease of Use. The Control System can be Switched to Manual Operation for Full Control of each Station.  Report Printing Capability to Show the Daily Use of Material.